Plasma cutters decrease steel the most efficiently.
Incision safely and exactly with your plasma cutter by using a standoff. A plasma cutter standoff keeps a miniature distance between the plasma cutting gratuity and the metal that you are cutting. This hole allows the electricity used in the cutter to punch completed the steel. When there is open contact between the cutting gratuity and the metal, the plasma cutter Testament not drudgery. Most plasma cutters encompass a standoff when purchased dewy; but, these pieces can be easily disoriented in a metal shop.
Instructions
1. Degree the circumference of the plasma-cutting nozzle holder. This is the abundance that any pre-fabricated standoff would mount to. Reference the owners handbook whether crucial.
2. Bend the steel wire at its 5-inch centre so you include a circle that is 1/16-inch smaller in breadth than the circumference you fashion in the ahead manner. Measure the distance from the nozzle holder to the tip of the cutter. This is the part that does the cutting. Add 1/16-inch to the measurement and bend each wire at a 90-degree away from each other.
The wires cross over Everyone other for this. Bend the wires at a 90-degree angle so they are paralell with each other and at a true angle to the circle that you just bent. This portion of the standoff will attach to the nozzle holder.3.
4. Bend the wires again so they make a circle using the same measurement you found in the first step. Cut off any excess wire with the wire cutters. This portion of the standoff will separate the cutting tip from the material. Fit the other portion over the nozzle holder to use.
