Removing the rear CD brake rotor on a Dodge Band is an considerable articulation of compelling brake perpetuation. Rotors that are badly scored from brake pad wear indicators and coarse debris, too as warped rotors that impede the contact between the brake pads and the rotor, coeval a compelling risk of degraded performance and yet brake failure. It is a commendable conception to regularly observe the brake rotors and now exchange damaged rotors when they are discovered.
Instructions
1. Grassland the Convoy on a Apartment lodgings surface. Corner tire blocks in front of the front tires of the motorcar.
Do not allow the caliper to hang by the brake line to avoid brake line damage or disconnection from the caliper.7. Remove the caliper bridge bolts with the 17 mm wrench (or socket and ratchet).
Area the lifting jack unbefitting the frame at the back of the vehivle. Lift the rear neb of the Cart and area jack stands subservient the frame for bedding.
4. Remove the lug nuts and the rear wheels.
5. Apply a 13 mm wrench to remove the caliper bolts located toward the elsewhere edge of the caliper.
6. Lift the caliper from the Caravan's caliper bridge and rest it on a jack stand (idle) or suspend it from a bungee looped around a component above the rear brake assembly.2. Loosen the lug nuts on the rear wheels with the lug wrench.3.
Remove the bridge from the rotor.
8. Pull the rotor from the wheel bolts by hand. If the rotor is stuck to the wheel hub, use a dead blow mallet to strike the top-hat section of the rotor to loosen the grip of rust or other adhesive culprits. The top-hat section of the rotor is the raised area on the outward facing surface of the disc.
