Dents can be reapired using various methods.
Regardless of the line, the duty of removing a dent on your automobile is to bring the affected area back to its latest shape. All the more of this Testament depend on the dent extent, stop on the vehicle entity and how broad the metal has long. That said, any one of the succeeding methods Testament job.
Hammering
Analysis to espy whether you corner access to the back side of the dent. Whether it is located on one of the doors, For instance, remove the trim panel. Hit the back of the dent with a plastic-tipped rubber mallet or a soft-face hammer. At the duplicate chronology, press a block of wood against the front of the dent. Bring the dent surface up to 1/8 inch from the exact of the metal sorrounding it.
PDR
A relatively new technique called paintless dent removal (PDR) has been gaining popularity over the last few years. Using special tools, a skilled technician can use PDR to repair a dent up to the size of a football without the need to repaint the affected area.Once you level the surface with either of the above methods, remove the paint from the dent and about an inch of the area surrounding the dent using a wire brush, sandpaper or sanding disk.
With the bare metal exposed, mark the dent with a screwdriver or drill very small holes inside the dent to help the filler compound grip onto the metal. Then apply body filler to the dent and paint the repaired area following the product manufacturer instructions.
Drilling
Whether the back of the dent is not accessible, drill humble holes inside the damaged area. Then screw long sheet-metal screws into the holes just enough so that the screws get a good grip on the dent's surface. Using a pair of locking or vise-grip pliers, start to pull the dent to about 1/8 inch from the level of the metal surrounding the damaged area.PDR has several advantages: It is cheaper than traditional body repair methods; eliminates the need for repainting the damaged area in most cases; works in almost any body panel of the car, depending on dent location; the job may be done in about an hour or two; and, when finished, a good technician can almost make the dent disappear.
National companies, automobile dealers and many independent shops around the United States are using PDR now and even offer mobile service to save time for their customers.
