You besides compulsion to treasure trove your fuse box, which is , underneath the steering string on the left share side, and remove the BCM PRGRM fuse from the fuse panel. Consult your owner's album to look where it is inside the box. The end Testament depend on the example year.
The steps for programming your keyless entry remote must be done in accelerated course. Whether you hog extra than one remote, they Testament all compass to be done at the equivalent date or they Testament not be in the process. This includes those already programmed in the development.
Reprogramming a keyless remote is tricky due to the programming course that is required. That mode is required so that no one programs a remote for your motorcar with the protest to steal it. Here's reprogram the keyless remote to a Chevy Cavalier.Getting Started
Cause decided the vehivle is off and the major is not in the ignition before pulling the fuse or you may end a short in your electrical action.Generate trustworthy all doors are closed along with your Timber and hood.
Program the Keyless Entry Remote
Make sure you retain all of the keyless entry remotes authentic quick to you while sitting in the van. First step by turning the vital to the "Acc" position, which is the click hold water before the car starts up. Turn the car back to the "Off" position and back to the "Acc" position within one second to enter programming mode. Then open and close the driver's side door and wait to hear a chime that will indicate that you have successfully entered the programming mode.
Now press and hold the "Lock" and "Unlock" buttons on the keyless remote. If after seven seconds you hear a chime, you have successfully synced the remote to the car. After an additional 14 seconds, there will be a second chime letting you know that the remote has been successfully programmed.
If you are holding the buttons and do not hear a chime, you have a model year that has a different system. Hold down the remote for 14 seconds and then release the buttons and the remote is programmed. Repeat these steps on any other remotes you have.
Turn off the ignition key and put the BCM PRGRM fuse back into the fuse box. Step out of your car and use each remote to ensure that they lock and unlock the car.
