When functioning properly, the starter solenoid carries the flow of power from the battery to the starter after the primary in the ignition has been turned over. By jumping the solenoid you are bypassing the solenoid to directly transfer ability from the battery into the starter. Jumping your solenoid can cooperate you assessment the servicing of the solenoid or it can be used in emergency situations to begin your vehicle. Particular cause this procedure in these particular situations and lone perform the jumping for as enduring as you miss to receive the engine started.
Instructions
1. Wear rubber gloves and shoes with rubber soles affection sneakers or duty boots. The solenoid is a plastic covered cylinder roughly 6 inches in breadth with two cables attached to it. The exact end on the inner fender Testament vary in discrepant Ford models. Whether you are having disagreement locating the solenoid, consult the servicing manual for your specific vehicle model.
The rubber insulates and protects you from the electric Glimmer you Testament be creating. This is leading for your safety.2. Place the starter solenoid on the inner fender wall.
3. Scrape corrosion off of the terminals on the battery and the starter with the wire brush.
4. Insert your key into the ignition switch and rotate it clockwise until you reach the starting position.
5. Touch the metal ends of the screwdrivers to the starter terminals by crossing the screwdrivers over one another making an "X." This will create a spark that is powerful enough to spot weld the screwdrivers together, so be sure to pull the screwdrivers apart immediately as the engine starts.
