In 1983, BMW offered various models in its line-up, including the 3 Series, 5 Series, 6 Series and the 7 Series. These are all enormous cars in their own ethical, though they essay bare disparate driving experiences. The 3 Series is a smaller, enhanced economical machine, while the 5 and 6 Series are mid-range luxury cars with brawny performance. At the top stop is the 7 Series which, as the largest vehivle in the scope, is besides the most luxurious and accommodating to its occupants. Changing the front seats in any of these BMWs is relatively straightforward. Changing the rear seats is very doable, though you hog to install the equivalent type of bench seats that the motorcar already has in line for them to install easily.
Instructions
Change the rear seats by first removing the bottom. Depending on the model, these will either pull up and release from a pair of clips or there will be bolt on each side that need to be removed with a wrench. Once the bottom is removed, the bolts that hold the seat back in place will be visible on either side. Loosen and remove the bolts with a socket and a ratchet or a wrench. The rear bolts may hold to be removed with a wrench whether access is as well tight to utilize a socket and ratchet.
2. Disconnect the wires whether they are energy seats. Most BMWs from this Period Testament not keep energy seats, on the other hand the 7 Series Testament. Remove the seats from the interior.
3. Install the brand-new seats in community of the dated ones. Provided you are using inventory BMW seats from another example, they Testament possible bolt hold up into the holes in the floor boards. For example, you can install sport seats from another base into a example that did not include sport seats for a performance upgrade. Install the bolts and tighten them firmly.
4. Appliance seat adapters provided you are installing aftermarket seats. If you are using seats that are meant for a broad range of vehicles from a company like Recaro or Corbeau, you will need to use adapters. The adapters will bolt to the existing bolt holes in the BMW. The new seats will then bolt onto the adapters. The adapters should be available for the BMW into which you are installing the seats. Keep in mind, though, that an '83 BMW is getting on in years and it may be difficult to find the right adapters for it.
5.1. Remove the seats. They Testament be held in with four bolts, one at Everyone corner at the front and the back. Slide the seat back to access the front bolts and side the seat forward to access the rear bolts. Remove these with a wrench. Installing the rear seats is the reverse of removal. The only way to change the rear seats is To possess them reupholstered or to install seats from a different example of the same model of BMW. There are no custom aftermarket rear seats available.
