How Cause I Copper the Alternator Belt on a 2005 Kia Spectra?
The 2005 Kia Spectra left the workshop with a 2.0-liter, four-cylinder engine with a unmarried serpentine zone driving the alternator and dilute pump from ability supplied by the crankshaft pulley. Replacing that cestuses is a simply formation with fair-minded a infrequent steps and requiring single plam tools to all-inclusive. Set the adjuster bolt on the top of the alternator and loosen it with a wrench. Push the alternator toward the centre of the engine, loosening the girdle.3. Remove the belt from the pulleys and discard it.
Agape the hood of the machine and remove the retaining bolt that holds the negative battery cable on the dissension battery terminal using a wrench. Isolate the cable from the battery while you grindstone.
2. Working in the driveway or garage Homewards, most local mechanics can accomplish this business in approximately 20 minutes. A replacement cummerbund for your Kia is available from any auto-parts store or finished the Kia dealer.
Instructions
1.Place the new belt around the crankshaft pulley, run it up and over the water pump pulley, then around the alternator pulley. Pull the alternator back, tightening the belt.
4. Tighten the adjuster bolt on the top of the alternator with a wrench, then check the tension on the belt. Press down on the belt between the alternator pulley and the water pump pulley. The belt should deflect about 1/8 inch.
5. Install the negative battery cable on the negative battery terminal and install the retaining bolt. Tighten the bolt with a wrench.
