Now use the grinder to grind the holes smooth and to grind away all paint in and around the damaged area.Apply a thick layer of body filler over the bare metal using a plastic squeegee. Allow the filler to dry completely. Use a dual action sander and sandpaper to smooth the hardened filler until it is as smooth as the sheet metal on the car.
Types of Tools
Removing dents from cars is not as rigid as it may seem whether you corner the Correct tools. Some petite, shallow dents may be removed with a accepted household plunger. Most other dents want the adoption of a dent puller, sometimes called a slide hammer. Dent pullers can be fashion at nearly automotive assistance store. They usually come in a tools which includes the dent puller, screw gratuity, panel piercer and lip puller and radius in value from approximately $10 to deeper than $50. They are available in colorful weights, depending on the proportions of the dent you are removing.
Other tools for removing dents are a entity hammer and metal dolly. A entity hammer is chief and should be used rather than a general carpenter's hammer. Protest hammers fictional specifically for vehicles are available in a barn door diversity of shapes, sizes and weights. The most commonly used type is a light-weight hammer with a pick on one side and Apartment lodgings purpose on the other. These hammers can be used alone or in conjunction with other tools, such as a dolly. Metal dollies are available in a Broad heterogeneity of shapes and sizes and.
Tools for refinishing the dent are a grinder, sandpaper, dual action sander, extensive block sander, body filler and a plastic squeegee.
Using the Tools
When repairing immature, shallow dents with a plunger, the surface must be wet so that the plunger can build suction with the stage metal. Use regular plunging motions against the dent to try and pull it out. This method is successful in some instances.
Most dents must be removed using a dent puller, or slide hammer. This method removes dents of any size and shape. Begin by making multiple holes in the dent using the panel piercer that was included in the kit or by using a drill. Once there are several holes, place the screw tip of the puller into a hole and tighten it slightly. Slide the handle down toward the car and pull it back quickly, using force. Rotate the dent puller in the drilled holes until the dent is pulled out as evenly as possible with the side of the vehicle.
Removing a dent from a automobile requires distinct earmarked tools mythical specifically for this labour. Some tools may be substituted with typical utilize tools, nevertheless the majority must be automotive tools. All Car dent Emigration tools can be form at most automotive servicing stores or parts stores. Most of these tools are inexpensive and can be used for any cook or representation of vehicle.Now you can paint the dent.
